Inter-module Interfacing techniques for SoCs with multiple clock domains to address challenges in modern deep sub-micron technologies

Miniaturization of integrated circuits (ICs) due to the improvement in lithographic techniques in modem deep sub-micron (DSM) technologies allows several complex processing elements to coexist in one IC, which are called System-on-Chip. As a first contribution, this thesis quantitatively analyzes the severity of timing constraints associated with Clock Distribution Network (CDN) in modem DSM technologies and shows that different processing elements may work in different dock domains to alleviate these constraints. Such systems are known as Globally Asynchronous Locally Synchronous (GALS) systems. It is imperative that different processing elements of a GALS system need to communicate with each other through some interfacing technique, and these interfaces can be asynchronous or synchronous. Conventionally, the asynchronous interfaces are described at the Register Transfer Logic (RTL) or system level. Such designs are susceptible to certain design constraints that cannot be addressed at higher abstraction levels; crosstalk glitch is one such constraint. This thesis initially identifies, using an analytical model, the possibility of asynchronous interface malfunction due to crosstalk glitch propagation. Next, we characterize crosstalk glitch propagation under normal operating conditions for two different classes of asynchronous protocols, namely bundled data protocol based and delay insensitive asynchronous designs. Subsequently, we propose a logic abstraction level modeling technique, which provides a framework to the designer to verify the asynchronous protocols against crosstalk glitches. The utility of this modeling technique is demonstrated experimentally on a Xilinx Virtex-II Pro FPGA. Furthermore, a novel methodology is proposed to quench such crosstalk glitch propagation through gating the asynchronous interface from sending the signal during potential glitch vulnerable instances. This methodology is termed as crosstalk glitch gating. This technique is successfully applied to obtain crosstalk glitch quenching in the representative interfaces. This thesis also addresses the dock skew challenges faced by high-performance synchronous interfacing methodologies in modem DSM technologies. The proposed methodology allows communicating modules to run at a frequency that is independent of the dock skew. Leveraging a novel clock-scheduling algorithm, our technique permits a faster module to communicate safely with a slower module without slowing down. Safe data communications for mesochronous schemes and for the cases when communicating modules have dock frequency ratios of integer or coprime numbers are theoretically explained and experimentally demonstrated. A clock-scheduling technique to dynamically accommodate phase variations is also proposed. These methods are implemented to the Xilinx Virtex II Pro technology. Experiments prove that the proposed interfacing scheme allows modules to communicate data safely, for mesochronous schemes, at 350 MHz, which is the limit of the technology used, under a dock skew of more than twice the time period (i.e. a dock skew of 12 ns

DeMiST: Detection and Mitigation of Stealthy Analog Hardware Trojans

The global semiconductor supply chain involves design and fabrication at various locations, which leads to multiple security vulnerabilities, e.g., Hardware Trojan (HT) insertion. Although most HTs target digital circuits, HTs can be inserted in analog circuits. Therefore, several techniques have been developed for HT insertions in analog circuits. Capacitance-based Analog Hardware Trojan (AHT) is one of the stealthiest HT that can bypass most existing HT detection techniques because it uses negligible charge accumulation in the capacitor to generate stealthy triggers. To address the charge sharing and accumulation issues, we propose a novel way to detect such capacitance-based AHT in this paper. Secondly, we critically analyzed existing AHTs to highlight their respective limitations. We proposed a stealthier capacitor-based AHT (fortified AHT) that can bypass our novel AHT detection technique by addressing these limitations. Finally, by critically analyzing the proposed fortified AHT and existing AHTs, we developed a robust two-phase framework (DeMiST) in which a synchronous system can mitigate the effects of capacitance-based stealthy AHTs by turning off the triggering capability of AHT. In the first phase, we demonstrate how the synchronous system can avoid the AHT during run-time by controlling the supply voltage of the intermediate combinational circuits. In the second phase, we proposed a supply voltage duty cycle-based validation technique to detect capacitance-based AHTs. Furthermore, DeMiST amplified the switching activity for charge accumulation to such a degree that it can be easily detectable using existing switching activity-based HT detection techniques.Comment: Accepted at ACM Hardware and Architectural Support for Security and Privacy (HASP) 202

All digital skew tolerant synchronous interfacing methods for high-Performance point-to-point communication in DSM SoCs

High-performance clocking of IPs, within a skew budget, is becoming difficult in Deep Sub-Micron technologies. Therefore, the concept of local islands of independent clocks prevails in SoCs, which can communicate using various synchronous and asynchronous interfacing methodologies. However, asynchronous methods are inadequately supported in the context of conventional synchronous design flows, and are also associated with substantial failure rates. By contrast, synchronous interfacing methods often require PLL based synchronization, which requires phase correction that consumes useful bandwidth and mixed signal components. This work proposes a novel and all digital synchronous design method for point-to-point communications, using n interfacing registers and locally delayed clocks with phase adjustments. An overall improvement in skew tolerance of up to n/2 to n times, compared to conventional designs, is obtained depending on the context. This is proven analytically. The modules are assumed to have same or integer multiple frequencies. Gate-level simulations are used to validate the analytical results. A proof of concept implementation of the proposed design is demonstrated using a Virtex-II Pro FPGA from Xilinx